Belay ESC

 Our Belay Electronic Speed Controller is a high powered, silent ESC for non-sensored brushless and outrunner motors. All units will come programmed with a base tune set to the KV to match the motor of your choosing.

Providing a hardware rating of 70 Amps of continuous and 110 Amps of burst, the control and power is delivered smoothly throughout the entire throttle band. Tested on 4S direct power servos with no issues.

Rated up to 6S battery power. 4S Max recommended for Rock Crawlers. (Check manufacturer specifications on servo and motor operation voltage before running large voltage batteries.)

NOW COMES CONFIRMAL COATED FROM THE FACTORY

Choose between an 8.4v built in BEC model or No BEC (recommended if running high amperage receiver powered servos) 

Updated with a built in Heat Sink

Size: 55mm x 19mm x 17mm 

Weight: 27g with wires

1 Year Warranty Covering everything except moisture damage and misuse

Includes:

-USB Programmer and Heat Shrink (if purchasing multiples your order will include 1 programmer unless requested by the customer.)

-1x JST Connectors 

-1x Receiver Connector for High Power BEC

-4mm Bullet Motor Connectors on 4 inch wires.

-XT30 Battery Connector

ONLY USE THE SUPPLIED PROGRAMMER WITH THE BUILT IN BEC UNIT. HARDWARE DAMAGE AND RISK OF FIRE CAN OCCUR IF USING A PROGRAMMER WITH SUPPLIED 5V POWER TO PRGORAMMER.

If you need a certain KV that isn’t listed just reach out to us